document number: 83631 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.8, 10-dec-08 407 optocoupler, phototriac output, low input current il440 vishay semiconductors description the il440 consists of a gaas infrared emitter optically coupled to a silicon planar triac chip with a non-zero crossing network. the two semiconductors are assembled in a 6 pin dual-in-line plastic package. the il440 can handle currents up to 100 ma rms. agency approvals ? ul1577, file no. e52744 system code h or j, double protection ? csa 93751 ? din en 60747-5-5 (vde 0884) available with option 1 ? bsi iec 60950; iec 60065 features ? 400 v blocking voltage ? 5.0 ma maximum trigger current ? isolation test voltage, 5300 v rms , t = 1.0 s ? isolation materials per ul94 ? pin compatible with optocouplers: - il440-4 moc 3021 - il440-5 moc 3022 - il440-6 moc 3023 ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec applications ? high current triac driver ? solid state relay ? switch small ac loads note for additional information on the availabl e options refer to option information. i179035 1 2 3 6 5 4 mt2 mt1 n c a c n c order information part remarks il440-4 15 ma i ft , 400 v v drm , dip-6 il440-5 10 ma i ft , 400 v v drm , dip-6 il440-6 5.0 ma i ft , 400 v v drm , dip-6 il440-4x007 15 ma i ft , 400 v v drm , smd-6 (option 7) il440-4x009 15 ma i ft , 400 v v drm , smd-6 (option 9) il440-5x006 10 ma i ft , 400 v v drm , dip-6 400 mil (option 6) il440-5x009 10 ma i ft , 400 v v drm , smd-6 (option 9) il440-6x006 5.0 ma i ft , 400 v v drm , dip-6 400 mil (option 6) il440-6x007 5.0 ma i ft , 400 v v drm , smd-6 (option 7) il440-6x009 5.0 ma i ft , 400 v v drm , smd-6 (option 9)
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83631 408 rev. 1.8, 10-dec-08 il440 vishay semiconductors optocoupler, phototriac output, low input current notes (1) t amb = 25 c, unless otherwise specif ied. stresses in excess of the absolute maxi mum ratings can cause permanent damage to the devic e. functional operation of the device is not im plied at these or any other conditions in excess of thos e given in the operational sections of this document. exposure to absolute maximum ratings for extended periods of the time can adv ersely affect reliability. (2) refer to reflow profile for soldering conditions for surface moun ted devices (smd). refer to wave profile for soldering condit ions for through hole devices (dip). notes (1) t amb = 25 c, unless otherwise specified. minimum and maximum values are testing requirements. typica l values are characteristics of the device and are the result of engineering eval uation. typical values are for informati on only and are not part of the testing re quirements. (2) off-state output terminal voltage (see table 1.) absolute maximum ratings (1) parameter test condition part symbol value unit input reverse voltage v r 5v forward current i f 60 ma surge current p.w. < 10 s i fsm 3a power dissipation p diss 100 mw junction temperature t j 100 c output peak off-state voltage il440-4 v drm 400 v il440-5 v drm 400 v il440-6 v drm 400 v on-state rms current i d(rms) 100 ma peak surge current t p 10 ms i fsm 1.2 a peak on-state current t p /t = 0.01 100 s i drm 2a power dissipation p diss 300 mw junction temperature t j 125 c coupler isolation voltage t = 1.0 s v iso 5300 v rms creepage distance 7mm clearance distance 7mm isolation resistance v io = 500 v, t amb = 25 c r io 10 12 v io = 500 v, t amb = 100 c r io 10 11 total power dissipation p tot 330 mw storage temperature range t stg - 55 to + 125 c ambient temperature t amb - 40 to + 100 c junction temperature t j 100 c lead soldering temperature (2) 2 mm from case, t < 10 s t sld 260 c electrical characteristics parameter test condition symbol min. typ. max. unit input forward voltage i f = 50 ma v f 1.25 v reverse voltage i r = 10 av r 5v junction capacitance v r = 0 v, f = 1 mhz c j 50 pf output (2) peak on-state voltage i tm = 100 ma, i ft = 30 ma v tm 1.5 3 v critical rate of rise of off-state voltage i f = 0, v d = 0.67 v drm dv/dt cr 50 v/s critical rate of rise of on-state current commutation i f = 30 ma, v d = 60 v rms dv/dt crq 0.13 0.25 v/s coupler holding current i f 10 ma, v s 3 v i h 1ma
document number: 83631 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.8, 10-dec-08 409 il440 optocoupler, phototriac output, low input current vishay semiconductors note test voltage must be applied within dv/dt rating of 0.13 v/s. notes (1) according to din en 60747-5-5 (see figure 1) . this optocoupler is suitable for safe el ectrical isolation only within the safety ratings. compliance with the safety ratings shall be ens ured by means of suitabl e protective circuits. (2) the device is used for protective separation agains electr ical shock within the maximum safety ratings. this must be ensured by protective circuits in the applications. note as per iec60747-5-2, 7.4.3.8.1, this optoc oupler is suitable for ?safe electrical insulation? only within the safety ratings. compliance with the safety ratings shall be ensured by means of prodective circuits. i ft and blocking voltage selection bin number b v (v) maximum at i drm = 500 na i ft maximum at v t = 6 v, r l = 150 il440-4 400 15 il440-5 400 10 il440-6 400 5 maximum safety ratings (1) parameter test condition symbol min. typ. max. unit input (2) forward voltage i s, input 130 ma output power dissipation p s, output 300 mw safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classification (according to iec 68 part 1) 55/100/21 pollution degree din vde 0109 2 comparative tracking index cti 175 v iotm 8000 v peak v iorm 890 v peak insulation resistance at 25 c v io = 500 v r is 10 12 insulation resistance at t s v io = 500 v r is 10 9 insulation resistance at 100 c v io = 500 v r is 10 11 partial discharge test voltage method a, v pd = v iorm x 1.875 v pd 1669 v peak p so 500 mw i si 250 ma t si 175 c clearance distance standard dip-6 7 mm creepage distance standard dip-6 7mm clearance distance 400 mil dip-6 8 mm creepage distance 400 mil dip-6 8 mm
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83631 410 rev. 1.8, 10-dec-08 il440 vishay semiconductors optocoupler, phototriac output, low input current package dimensions in inches (millimeters) i17 8 004 0.010 (0.25) typ. 0.114 (2.90) 0.130 (3.0) 0.130 (3.30) 0.150 (3. 8 1) 0.031 (0. 8 0) min. 0.300 (7.62) typ. 0.031 (0. 8 0) 0.035 (0.90) 0.100 (2.54) typ. 0.039 (1.00) min. 0.01 8 (0.45) 0.022 (0.55) 0.04 8 0.022 (0.55) 0.24 8 (6.30) 0.256 (6.50) 0.335 ( 8 .50) 0.343 ( 8 .70) pin one id 6 5 4 1 2 3 1 8 3 to 9 0.300 to 0.347 (7.62 to 8 . 8 1) 4 typ. iso method a (0.45) min. 0.315 ( 8 .00) 0.020 (0.51 ) 0.040 (1.02 ) 0.300 (7.62) ref. 0.375 (9.53) 0.395 (10.03 ) 0.012 (0.30 ) typ. 0.0040 (0.102) 0.009 8 (0.249) 15 max. option 9 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.307 (7. 8 ) 0.291 (7.4) 0.407 (10.36) 0.391 (9.96) option 6 0.315 ( 8 .0) min. 0.300 (7.62) typ. 0.1 8 0(4.6) 0.160 (4.1) 0.331 ( 8 .4) min. 0.406 (10.3) max. 0.02 8 (0.7) option 7 1 8 450
document number: 83631 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.8, 10-dec-08 411 il440 optocoupler, phototriac output, low input current vishay semiconductors ozone depleting substa nces policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve t he performance of our products, processes, distribution and o perating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances in to the atmosphere whic h are known as ozone depleting substances (odss). the montreal protocol (1987) a nd its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. vari ous national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of co ntinuous improvements to elim inate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively. 2. class i and ii ozone depleting substances in the clean air ac t amendments of 1990 by the environmental protection agency (epa) in the usa. 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify t hat our semiconductors are not manufactured with ozone dep leting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating para meters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, dam ages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death as sociated with such unint ended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
